CG Air Millenium 900W blower.
Comes with a cable and AMP plug.
Connects to standard 2" piping.
Specifications
- 240 Volts
- 60HZ
- 900W
Dimensions
- Length: 9 3/4"
- Width: 6 1/2"
- Height: 7 1/2"
- Cable length: 9ft
CG Air Millenium 900W blower.
Comes with a cable and AMP plug.
Connects to standard 2" piping.
Specifications
Dimensions
Iron Might 1/15HP 1 speed circulation pump.
Does NOT come with a cable.
Connects to standard 1 1/2" piping with a split nut.
Specifications
Dimensions
Laing E-14 circulation pump with power cable.
Specifications
Dimensions
Replacement Gasket PS-201
Specifications :
Dimensions :
Waterway Tiny Might 115V Circulation Pump.
Accepts 1" pump unions for 1" pipe.
Features 1/2" Slip Sockets (1/2" pipe can be glued directly).
Designed for 24-hour continuous recirculation.
Specifications
Dimensions
Iron Might 1/15HP 1 speed circulation pump.
Does NOT come with a cable.
Connects to standard 1 1/2" piping with a split nut.
Specifications
Dimensions
LX 2hp 2 speed spa pump.
Does NOT come with a cable.
Connects to standard 2" piping with a split nut.
Specifications
Dimensions
Replacement Gasket PS-1000
Laing E-5 spa circulation pump.
Connects with standard 3/4" tubing and clamp.
(Do not use glue to attach the piping to the pump)
Comes with a cable, without connection.
The pump can be mounted horizontally or vertically with the motor end facing down.
Specifications
Dimensions
LX brand circulation pump 1 / 15HP type Circ-Master Convertible 115-230V
WaterWay Executive 2 Speed Pump
Inlet and outlet for 2"* piping for better performance and reduced noise.
Better energy consumption. Thermal protection for a better lifespan.
Versatile wet end; can be flipped 90°, 180°, 270°
Good corrosion resistance against chlorine, bromine and salt.
Works with standard 2" piping (for the interior, flexible or rigid piping can be used).
Specifications
*The exact measurement of the water inlet and outlet is 3" including the thread.
Laing E-10 spa circulation pump.
Ideal for replacing the original pumps on some Sundance, Hotspring and Jacuzzi spas.
Connects with standard 3/4" tubing and clamp.
(Do not use glue to attach the piping to the pump)
The orientation of the pump head can easily be changed by unscrewing the screws that connect the head to the pump.
The pump comes with a cable, without connection.
Specifications
Dimensions
Specifications :
Dimensions :