Spa pumps

LX 0.35hp 1 speed spa pump.

Cable included.
Does NOT come with PVC connectors.

Connects to standard 1"½ piping with a split nut.

Specifications

• 60hz
• 240V
• Power: 0.35HP
• Max flow: 1700r/min
• Qmax 14 m³/h

Dimensions

• Length: 30 cm
• Width: 16 cm
• Height: 20 cm
• Outer diameter inlet/outlet: 2"½

LX 1.5hp 2 speed spa pump.

Does NOT come with a cable.
Does NOT come with PVC connectors.

Connects to standard 2" piping with a split nut.

Specifications :

• 60hz
• 115V
• Frame: 48
• Wet End Frame : 56
• Power: 1.5HP
• Max high speed flow: 3450r/min
• Max low speed flow: 1725r/min

Dimensions :

• Length: 38 cm
• Width: 19 cm
• Height: 20 cm
• Outer diameter inlet/outlet: 3"

Iron Might 1/15HP 1 speed circulation pump.

Does NOT come with a cable.

Connects to standard 1 1/2" piping with a split nut.

Specifications :

• IP55
• 115V
• 60HZ
• Frame: 48
• Power: 1/15HP

Dimensions :

• Length: 12"
• Width: 8 1/4"
• Height: 8 3/4"
• Outer diameter inlet/outlet: 2 3/8"

Specifications :

• Frame 48
• 2 HP
• 115 Volts
• 60 HZ
• 2 Speed

Dimensions : 

• Height : 21 cm
• Length : 42 cm
• Width : 16 cm

Specifications :

• Frame 48
• 1/12 HP
• 230 Volts
• 60 HZ
• 1 Speed

Dimensions : 

• Height : 21 cm
• Length : 32 cm
• Width : 16 cm

Waterway Tiny Might 115V Circulation Pump.

Accepts 1" pump unions for 1" pipe.
Features 1/2" Slip Sockets (1/2" pipe can be glued directly).
Designed for 24-hour continuous recirculation.

Specifications :

• 1/16 HP
• 115V
• 60 HZ
• 7 lbs
• 0.8 Amps

Dimensions :

• Length : 10.1"
• Width : 4.5"
• Height : 5.9"

CG Air Millenium 900W blower.

Comes with a cable and AMP plug.

Connects to standard 2" piping.

Specifications

• 240 Volts
• 60HZ
• 900W

Dimensions

• Length: 9 3/4"
• Width: 6 1/2"
• Height: 7 1/2"
• Cable length: 9ft

Iron Might 1/15HP 1 speed circulation pump.

Does NOT come with a cable.

Connects to standard 1 1/2" piping with a split nut.

Specifications :

• IP55
• 240V
• 60HZ
• Frame: 48
• Power: 1/15HP

Dimensions :

• Length: 12"
• Width: 8 1/4"
• Height: 8 3/4"
• Outer diameter inlet/outlet: 2 3/8"

LX 3HP 2 speed spa pump.

Does NOT come with a cable.
Connects to standard 2" piping with a split nut.

*Can be sold with or without a base.*

Specifications :

• 60hz
• 230V
• Frame: 56
• Power: 3HP
• Max high speed flow: 3450r/min
• Max low speed flow: 1725r/min

Dimensions :

• Length: 45cm
• Width: 20 cm
• Height: 20 cm
• Outer diameter inlet/outlet: 3"

Waterway Executive 2 Speed ​​Pump

Inlet and outlet for 2"* piping for better performance and reduced noise.
Better energy consumption. Thermal protection for a better lifespan.

Versatile wet end; can be flipped 90°, 180°, 270°
Good corrosion resistance against chlorine, bromine and salt.

Works with standard 2" piping (for the interior, flexible or rigid piping can be used).

Specifications :

• Hz: 60
• Volts: 230
• Frame: 56
• Power: 4 HP
• Weight: 44 lbs
• Low speed amperage: 4.4 amps
• High Speed ​​Amperage: 12.0 amps

*The exact measurement of the water inlet and outlet is 3" including the thread.

5/8" ball bearing

LX brand circulation pump 1 / 15HP type Circ-Master Convertible 115-230V

• Convertible 115-230V
• Standard 1-1 / 2 ″ inlet and outlet
• Power cord not included

Laing E-5 spa circulation pump.
Connects with standard 3/4" tubing and clamp.

(Do not use glue to connect the piping to the pump)

Cable included, without connection.

The pump can be mounted horizontally or vertically with the motor end facing down.

Specifications :

• Power: 39W, 1/40 HP
• Flow rate: Approximately 40 liters/min
• 50/60 HZ
• IP44
• 3/4" pump inlet and outlet checked for standard piping

Dimensions :

• Length: 160mm
• Width: 90mm
• Height: 115mm
• Cable length : 81 cm

Laing E-14 circulation pump with power cable.

Specifications :

• 220 Volts
• Power: 115W, 1/25 HP
• 50/60 HZ
• Maximum flow: approximately 150 liters/min
• Cable with 4-pin male AMP plug
• Pump inlet and outlet 1" 1/2 threaded for standard piping
  
  

Dimensions :

• Length: 155mm
• Width: 135mm
• Height: 160mm
• Cable length: approx. 112 cm

Laing E-10 spa circulation pump.
Ideal for replacing the original pumps on some Sundance, Hotspring and Jacuzzi spas.
Connects with standard 3/4" tubing and clamp.

(Do not use glue to connect the piping to the pump)

The orientation of the pump head can easily be changed by unscrewing the screws that connect the head to the pump.

Cable included, without connection.

Specifications :

• Power: 60W, 1/40 HP
• Flow rate: Approximately 40 liters/min
• 230V
• 50/60 HZ
• IP55
• 3/4" pump inlet and outlet checked for standard piping

Dimensions :

• Length: 152mm
• Width: 110mm
• Height: 125mm
• Support base: 121 x 96 mm
• Cable length : 155 cm

Replacement Gasket PS-201

Replacement Gasket PS-200

Replacement Gasket PS-1000