Replacement Gasket PS-201
-
Shop
add remove
-
Spa Covers
add remove CUSTOM MADE SPA COVER add removeIN STOCK SPA COVER add remove
-
Accessories
add remove
-
Parts
add remove
-
Tips and Resources
add remove Owner Manuals add removeUsage & Tips add removeMaintenance with Chlorine add removeMaintenance With Bromine add removeSpa Winter Maintenance add removeWinter EMERGENCY procedure add removeCopper & Silver Ionizer add remove
- Our Company add remove
Ball Bearing 6304
Ball Bearing 6304
other products
Replacement Gasket PS-200
WaterWay Executive 2 Speed Pump
Inlet and outlet for 2"* piping for better performance and reduced noise.
Better energy consumption. Thermal protection for a better lifespan.
Versatile wet end; can be flipped 90°, 180°, 270°
Good corrosion resistance against chlorine, bromine and salt.
Works with standard 2" piping (for the interior, flexible or rigid piping can be used).
Specifications
- Hz: 60
- Volts: 230
- Frame: 56
- Power: 4 HP
- Weight: 44 lbs
- Low speed amperage: 4.4 amps
- High Speed Amperage: 12.0 amps
*The exact measurement of the water inlet and outlet is 3" including the thread.
LX 2hp 2 speed spa pump.
Does NOT come with a cable.
Connects to standard 2" piping with a split nut.
Specifications
- 60hz
- 230V
- Frame: 48
- Power: 2HP
- Max high speed flow: 720L/min
- Max low speed flow: 320L/min
Dimensions
- Length: 45cm
- Width: 20 cm
- Height: 20 cm
- Outer diameter inlet/outlet: 3"
LX brand circulation pump 1 / 15HP type Circ-Master Convertible 115-230V
- Convertible 115-230V
- Standard 1-1 / 2 ″ inlet and outlet
- Power cord not included
Replacement Gasket PS-1000
CG Air Millenium 900W blower.
Comes with a cable and AMP plug.
Connects to standard 2" piping.
Specifications
- 240 Volts
- 60HZ
- 900W
Dimensions
- Length: 9 3/4"
- Width: 6 1/2"
- Height: 7 1/2"
- Cable length: 9ft
Laing E-10 spa circulation pump.
Ideal for replacing the original pumps on some Sundance, Hotspring and Jacuzzi spas.
Connects with standard 3/4" tubing and clamp.
(Do not use glue to attach the piping to the pump)
The orientation of the pump head can easily be changed by unscrewing the screws that connect the head to the pump.
The pump comes with a cable, without connection.
Specifications
- Power: 60W, 1/40 HP
- Flow rate: Approximately 40 liters/min
- 230V
- 50/60 HZ
- IP55
- 3/4" pump inlet and outlet checked for standard piping
Dimensions
- Length: 152mm
- Width: 110mm
- Height: 125mm
- Support base: 121 x 96 mm
- Cable length : 155 cm